Harley-Davidson Fat Boy

Specifications

• Power & Performance

  Displacement Engine displacement is the measure of the cylinder volume swept by the pistons of an internal combustion engine. It indicates the engine size. 1,868 cc

  Max Power 92.5 bhp @ 5,020 rpm

  Max Torque 155 Nm @ 3,500 rpm

  Stroke Stroke indicates the number of engine cycles during which a piston travels from top to bottom. 114 mm

  Valves Per Cylinder Valves per cylinder indicate the intake (fuel) and outlet (exhaust of combustion gases) of an engine. 4

  Compression Ratio A compression ratio suggests the degree to which the fuel mixture is compressed before ignition. 10.5:1

  Mileage - ARAI ARAI certified fuel economy that has been tested under controlled conditions. 18 kmpl

  Mileage - Owner Reported This is the fuel economy registered by Bikewale followers. --

  Riding Range The total range that a vehicle can travel on a full tank of fuel. 340.2 Km

  Top Speed The maximum speed that a vehicle can achieve. 177 Kmph

  Transmission 6 Speed Manual

  Transmission Type The transmission type will tell the kind of transmission a two-wheeler has. Chain Drive

  Gear Shifting Pattern Gear Shifting Pattern 1 Down 5 Up

  Cylinders The number of cylinders that an engine features. Most two-wheelers sold in the Indian market feature a single-cylinder. 2

  Bore Bore is the diameter of each cylinder. 102 mm

  Ignition Ignition indicates to the type of starting system that a vehicle uses. CDI

  Spark Plugs A spark plug is a device for firing the explosive mixture. 2 Per Cylinder

  Cooling System The cooling system suggests the cooling mechanism that a motor uses. The types include air, oil, or liquid. Liquid Cooled

  Clutch The clutch disengages or engages the engine from the transmission. Wet Multiplate

  Fuel Delivery System Fuel Injection

  Fuel Tank Capacity The capacity of a vehicle to store fuel. 18.9 litres

  Reserve Fuel Capacity Reserve fuel is part of the main tank that is used when a vehicle is running low on petrol/diesel. 3.8 litres

  Emission Standard Emission standards indicate the output from the exhaust that is permissible in a country. BS6

  Fuel Type Fuel Type is the type of fuel that an engine uses to operate. The different types include petrol, diesel, electric, and ethanol among others. Petrol
  View more specs
• Brakes, Wheels & Suspension

  Front Suspension Front suspension usually includes telescopic forks. Dual-bending valve 49 mm telescopic with aluminum fork triple clamps

  Rear Suspension Rear suspension setup mostly uses a rear mono-shock. Hidden, free piston, coil-over monoshock; 43mm stroke

  Braking System Braking system is used to reduce the speed of the vehicle or bring it to a standstill. Dual Channel ABS

  Rear Wheel Size Rear wheel size indicates the diameter of the rear wheel. 18 inch

  Front Tyre Size Front tyre size indicate the profile of the front tyre. 160/60 - R18

  Rear Tyre Size Rear tyre size indicates the profile of the rear tyre. 240/40 - R18

  Front Brake Type Most vehicles feature a disc brake at the front although some commuter segment products come with a drum setup. Disc

  Front Brake Size Front brake size indicates the size of the disc or drum setup at the front wheel. 300 mm

  Rear Brake Type Most vehicles come with a drum brake setup at the back although higher spec models feature a disc brake at the rear. Disc

  Rear Brake Size Rear brake size indicates the size of the disc or drum setup at the front wheel. 292 mm

  Calliper Type Front-4 Piston, Rear-2 Piston Calliper

  Wheel Type Wheel types include two types - Wire-spoke and Alloy wheels. Alloy

  Front Wheel Size Front wheel size indicates the diameter of the front wheel. 18 inch

  Tyre Type Tyre types are divided into two - Tubeless and Tube Type. Tubeless

  Radial Tyres Radial tyres use steel belts that run at a 90-degree angle with the tread line. Yes

  Front Tyre Pressure (Rider) 36 psi

  Rear Tyre Pressure (Rider) 40 psi

  Front Tyre Pressure (Rider & Pillion) 36 psi

  Rear Tyre Pressure (Rider & Pillion) 40 psi
  View more specs
• Dimensions & Chassis

  Kerb Weight Kerb weight of the motorcycle is the total weight of a vehicle that is ready for operation. It includes all standard equipment and necessary consumables. 317 kg

  Seat Height The seat height is the height of the rider's saddle from the ground. 675 mm

  Ground Clearance The ground clearance is the distance between the ground and the lowest point of a vehicle. 115 mm

  Overall Width Total width of the vehicle. 985 mm

  Overall Height Overall height is the tallest point of a motorcycle, usually the mirror or the top of a windscreen. 1,095 mm

  Wheelbase The wheelbase is the distance between the front and the rear wheel. 1,665 mm

  Overall Length Overall length of the vehicle is the total length of a two-wheeler from the front to the back. 2,370 mm

  Chassis Type The chassis type is the primary/main frame of a two-wheeler. Mild steel, tubular frame
  View more specs
• Manufacturer Warranty

  Standard Warranty 2 Year

  Standard Warranty Unlimited Km